Products

We use the finest available materials in the state, and have the ability to get these materials to your job site extremely quickly.

See below for our current colour and pattern charts.

DESCRIPTION:

We have a spray on concrete material that is a spray-on cementitious based polymer modified 2-part concrete resurfacing system. Our product achieves a simulated paving bricks, tiles and bushrock on existing plain concrete surfaces. this product achieves excellent compressive, tensile and flexural strength, extremely high abrasion resistance, textured slip-resistant decorative surfaces are features of our concrete resurfacing system.

FEATURES AND BENEFITS:

Transforms plain concrete pavement surfaces. Colours and stencil patterns replicate traditional brick, tile and stone surfaces. Header courses, rosettes, logos and custom features enhance appeal and add value.

Saves cost of removal and reinstatement of plain concrete pavements.

Our material thickness is approximately 2-3mm creating minimal impact on pavement design loading and existing pavement levels.
Easily applied to large or small areas.

Plain concrete can be placed early on in construction of commercial projects for safe and effective access. Then we apply our product nearing completion.

Service life expectation in excess of 20 years, dependant upon the abrasion to which the surface is subjected and, as is the case for all paving, dependent on exposure conditions and maintenance.

Compressive strength:

7 Days	35MPa
14 Days	38.5MPa
28 Days	41.5MPa

Slip Resistance
A coefficient of friction of 0.80 when tested wet. This substantially exceeds the minimum value of 0.4 required by AS/NZS 3661.1 .

Abrasion Resistance
A mean abrasion index of 0.1. This is in the highest category for wear resistance and indicates that the treated surface is suitable for high traffic areas.

 

ROAD MENDER.

GENERAL USE

• Repairing hairline cracks or larger, where future movement is not anticipated.

• Repairing spalled control joints.

• Restoring integrity to distressed concrete.

• Connecting broken slabs.

• Repairing moving slabs.

• Repairing spalls and pop-outs in concrete.

• Securing bolts, equipment, or railings into concrete.

• Vertical repairs when combined with specified sand.

• Rebonding delaminated floors

• Ramping elevated slabs

• Repairing concrete surface imperfections prior to coating.

 

PHYSICAL/CHEMICAL PROPERTIES

Typical test results when tested in accordance with applicable ASTM standards and Roadware developed testing.

Typical Properties: Value (average)

Hardness @ 72° F. (22° C) 72D

Compressive Strength (with sand) 4500 psi

Elongation: 6%

Tensile Strength: 4475 psi

Bond Strength, ASTM 882-99: 1984 psi

Viscosity (at application) <9 cps

V.O.C.(mixed): 5.5 g/l

Solids: 98%

Cured Color Gray

Gel time @ 72° F (22° C) 6-7 min

Cure time @ 72° F (22° C) 10 min

 

 

 

Concrete Resurfacing Colours.

 

Current Colour Charts

Available Patterns